June 21, 2016
/ Posted in: Builders, Dealers, DIY, Framers
The rapid rate with which burgeoning technologies introduce new materials, products and techniques to the construction industry marketplace means that building codes need to be constantly changing in order to provide consumers with buildings which are safe and energy efficient. This means that every three years, building code changes help to improve the way we build. For small business owners, these constant changes may prove difficult to keep up with.
Read The Full Post »
June 20, 2016
/ Posted in: Builders, Dealers, DIY, Framers
A common summer problem is condensation on walls around AC air vents. Moisture is insidious and, once allowed to enter wall structures, can result in damage, mold and mildew. While quick-fix solutions may provide cosmetic relief, it is best to spend the time and money to ensure that moisture is not seeping into your wall structures.
Read The Full Post »
June 11, 2016
/ Posted in: Builders, Dealers, Framers
While you should always adhere to the manufacturer’s installation instructions, there are some general guidelines provided by the NWFA that apply to most subflooring installations. There are a number of subflooring options available and you can speak with your design professional to find one that suits your climate, needs and budget.
Read The Full Post »
May 25, 2016
/ Posted in: Builders, Dealers, DIY, Framers
Organizing your workshop and getting the most out of every item that comes through your door will take a little effort, but it will save you time and money in the long run. Here are a few easy steps to creating the ideal workshop space.
Read The Full Post »
May 20, 2016
/ Posted in: Builders, Dealers, DIY, Framers
Over the last ten years, builders have been participating in a quiet revolution that is changing the fastener industry. In a bid to save time and money, contractors are moving away from the more traditional power drills and multiple styles of bits to the more effective impact driver.
Read The Full Post »
May 10, 2016
/ Posted in: Builders, Dealers, DIY, Framers
It’s spring and, as home and condo owners take advantage of the improved weather to do a little work on their homes, you may be wondering where your renovation dollar will have the most impact. Careful planning and the right choices are the best way to ensure that your home improvements actually add value to your property.
Read The Full Post »
April 29, 2016
/ Posted in: Builders, Dealers, DIY, Framers
Knowing what to look out for will help you to pass your building inspection with flying colors. Failing an inspection can be costly and time consuming and can eat into already tight profit margins. Here are some of the most common reasons building fall short of code expectations.
Read The Full Post »
April 25, 2016
/ Posted in: Builders, Dealers, DIY, Framers
Failing a building inspection is a frustrating and costly experience for most contractors. You may have to go back and make adjustments or redo some aspects of the build and your scheduling will be compromised. You take longer to do the job and have to pay for the adjustments and that eats into your profit margins. Knowing the most common code violations and how to avoid them can save you time and money.
Read The Full Post »
April 14, 2016
/ Posted in: Builders, Dealers, DIY, Framers
A recent inspection on a family residence revealed that sheathing panel edges were telegraphing through the roofing shingles. Since the roof was properly ventilated and there was no moisture present, we conducted an inspection to see what was causing the problem.
Read The Full Post »
April 13, 2016
/ Posted in: Builders, Dealers, DIY, Framers
Recently we had a call from a builder complaining that their roof sheathing was buckling, causing a telegraphing effect through their roofing shingles. Concerned about the structural efficacy of the roof, they asked us to take a look. The builder and dealer thought it was a number of problems with the roofing panels themselves but, on closer inspection, we discovered that there were a number of installation issues that caused the problem.
Read The Full Post »
